FREE STANDARD SHIPPING FOR ORDERS OVER $50 AND FREE RETURN SHIPPING
 

Adding another music source

You can use another audio device, such as a portable digital music player, with your system. This requires using a stereo audio cable with a 3.5 mm (1/8-inch) mini plug (not provided) that is appropriate for the connected audio device that plugs into the Aux IN connector on the back of the SoundDock® system.

  • Insert the audio cable from your audio device into the Aux IN jack on the back of the SoundDock® system. If your iPod® or iPhone® is not docked, the connected device will play automatically once it sends an audio signal to the SoundDock® system
  • Set the connected device to full volume, and then use the SoundDock® system volume buttons to adjust the level

Note:

  • Press and hold Volume + and Volume - for two seconds to enable the connected device to play through the system if your iPod® or iPhone® is charging in the dock

Volume +

Volume -

  • The iPod® or iPhone® charges while you are playing audio from the connected device
  • Press and hold Volume + and Volume - for two seconds to switch from the connected device to your docked iPod® or iPhone®

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided