Connecting the optional wireless surround speakers

Before you begin

Check for and install any available system updates: Open the SoundTouch app and go to "Menu" > "Settings" > "Speaker Settings." If an update is available, tap "UPDATE SOFTWARE" to install it.

Connecting your speakers

Connect each surround speaker to a wireless receiver

Set the L/R switch of each wireless receiver to the appropriate setting depending on the position of the speaker to which they are connected

System set up highlighting the wireless receiver left and right rear switch settings

Connect the wireless receivers to AC power sockets

On the soundbar remote, press the SoundTouch button

SoundTouch button highlighted on the SoundTouch remote

Press and hold the number 7 until the connectivity light on the front of the soundbar blinks white, then release the button. Once connected, the light glows solid white and the speakers emit a tone

Tip: If the speakers do not connect, unplug the soundbar and wireless receivers for 30 seconds, then try again.

SoundTouch remote highlighting the SoundTouch button and the pressing of number 7, with the light glowing solid white on the soundbar

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided