ENJOY FREE GROUND DELIVERY WHEN YOU ORDER TODAY
 

Updating the system software (video included)

Software updates sometimes become available to improve the performance of your system. To update your software, follow these steps:

Make sure your SoundLink® Air system is connected to your Wi-Fi® network and that there is an Internet connection. The Wi-Fi® indicator on the front panel should be solid blue

Wi-Fi® indicator

On the remote, press and hold MUTE for ten seconds while watching the Wi-Fi indicator

Mute

If the Wi-Fi indicator double-blinks green twice, you can release the MUTE button: the system software is up to date and the system returns to the previous operating mode

Mute

If the Wi-Fi indicator starts quickly blinking green, release the MUTE button: a software update is necessary and the software will start downloading. The Wi-Fi® indicator continues blinking until the download is finished. While the software update is being installed, the Wi-Fi® indicator glows solid green for three seconds followed by a double blink. This pattern repeats until the installation is finished. At the end of the installation, the system emits a tone and automatically restarts. After restart, the system will automatically connect to your Wi-Fi® network again

Note: a software update can take a few minutes to install.

Mute

CAUTION: Do not remove power from the SoundLink® Air system while updating the system software.

Note: If the Wi-Fi® indicator starts blinking red, a system error has occurred. Contact Bose® Customer Service for assistance.

Was this helpful?

Submit

Thank you for submitting your comments.