FREE STANDARD SHIPPING FOR ORDERS OVER $50 AND FREE RETURN SHIPPING
 

Connecting the optional wireless bass module

Before you begin

Check for and install any available system updates: Open the SoundTouch app and go to "Menu" > "Settings" > "Speaker Settings." If an update is available, tap "UPDATE SOFTWARE" to install it.

Connecting your bass module

Your system can connect one or two bass modules. To connect two, both must be the same model and also connected wirelessly. If you have two wireless bass modules to connect, connect the first, then repeat these steps for the second.

Connect the bass module to an AC power socket

On the soundbar remote, press the SoundTouch button

SoundTouch button highlighted on the SoundTouch remote

Press and hold the number 7 until the connectivity light on the front of the soundbar blinks white, then release the button. Once connected, the light glows solid white and the bass module emits a tone.

Tip: If the bass module does not connect, unplug the soundbar and bass module for 30 seconds, then try again.

SoundTouch remote highlighting the SoundTouch button and the pressing of number 7, with the light glowing solid white on the soundbar

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided