NEW: Bose open earbuds. Explore
Price is: $338.00
Price is: $338.00
| Microphones | Built-in Microphone |
|---|---|
| Sound Options | Shielded Speakers, Speakerphone, SimpleSync, Full Range Speakers, Party Mode (When Enabling Two Speakers), PositionIQ, Stereo Mode (When Enabling Two Speakers) |
| Audio cable included | No |
| Water-Resistant | IP67 |
| Entire Product System | 5.23 cm H x 20.14 cm W x 9.04 cm D (0.59 kg) |
| Product Material | Aluminum, Fabric, Nylon, Plastic, Silicone, Steel |
| Battery Life | 12 hours |
| Battery Charge Time | 4 hours |
| Charging Interface(s) | USB C PORT |
| Wireless Connectivity | Bluetooth, Wireless Connectivity |
| Bose App | Bose App |
Multipoint is a Bluetooth technology that allows your SoundLink Flex (2nd Gen) to maintain a connection to two paired source devices at the same time. Your speaker will seamlessly transition between the two devices, so you’re always connected to the active source device.
Shortcuts allow you to configure settings for the programmable shortcut button on SoundLink Flex (2nd Gen). You can manage your shortcut in the Bose App. Out of the box, the factory default shortcut is set to linking, allowing you to use the button to link two compatible Bose speakers without the app.
You can change your shortcut button to be connected to your Spotify account to begin music at the press of a button, access your Voice Assistant, or other options that may become available with future firmware updates through the Bose App.
Yes. Using Bose SimpleSync technology, you can connect to your SoundLink Flex (2nd Gen) from a SimpleSync-enabled Bose smart soundbar or Bose smart speaker to extend the reach of your listening to other places in the vicinity, such as an adjacent room. You can manage SimpleSync in the Bose App.
Yes, when there is an incoming call, pressing the play/pause button will answer the call and double pressing the play/pause button will decline a call. Double press the play/pause button while in a call to end it.
Yes, SoundLink Flex (2nd Gen) floats, but is not designed to be used while in water. SoundLink Flex (2nd Gen) is designed to withstand accidental drops in water for up to 30 minutes. If SoundLink Flex (2nd Gen) is directly exposed to salt or chlorinated water, rinse with fresh water and allow to dry thoroughly before use.
If debris gets into the charging port or other parts of SoundLink Flex (2nd Gen), gently rinse with fresh water or compressed air. Be sure charging ports are thoroughly dry before charging. For the larger exterior surfaces, wipe clean with a soft cloth. Avoid using cleaning detergents and let the speaker dry completely before operating.
| Microphones | No Microphone |
|---|---|
| Audio cable included | No |
| Water-Resistant | IP67 |
| Entire Product System | 4.3 cm H x 10.4 cm W x 10.4 cm D (0.33 kg) |
| Product Material | Silicone, Plastic (PC-ABS), Fabric, Steel |
| Battery Life | 12 hours |
| Battery Charge Time | 3 hours |
| Charging Interface(s) | USB C PORT |
| Wireless Connectivity | Bluetooth |
| Bose App | Bose App |
No. The SoundLink Micro (2nd Gen) will sink; it does not float.
Yes. The SoundLink Micro Speaker (2nd Gen) has a replaceable fabric strap, sold separately.
Active EQ (equalization) involves electronically tuning the frequency response to closely match the proprietary Bose audio response curve. The closer the frequency response comes to matching the target curve, the more lifelike the audio performance.
Multipoint is a Bluetooth technology that allows your SoundLink Micro (2nd Gen) to maintain a connection to two paired source devices at the same time. Your speaker will seamlessly transition between the two devices, so you’re always connected to the active source device.
Shortcuts are managed through the Bose app. Shortcuts allow you to configure settings for the programmable shortcut button on SoundLink Micro (2nd Gen). When your SoundLink Micro (2nd Gen) is new, the factory default shortcut is set to linking, allowing you to use the shortcut button to link two Bose speakers together. You can change your shortcut button to begin playing music from your Spotify account or to access your voice assistant. Other options may become available with future firmware updates through the Bose app.
Party Mode lets you connect two Bose Bluetooth speakers to play audio in perfect sync. This feature requires two Bose Bluetooth speakers with a shortcut button (may be a combination) of the following speakers: SoundLink Micro (2nd Gen), SoundLink Flex (2nd Gen), SoundLink Plus, or SoundLink Max.
Stereo Mode allows you to unlock a stereo audio experience where the left and right speakers play separately. Stereo Mode can only be used with two SoundLink Micro Speaker (2nd Gen) speakers.
Yes. Using Bose SimpleSync technology, you can connect to your SoundLink Micro (2nd Gen) from a SimpleSync-enabled Bose smart soundbar or Bose smart speaker to extend the reach of your listening to other places in the vicinity, such as an adjacent room. Use the Bose app to use SimpleSync.
No, there are no microphones in the SoundLink Micro (2nd Gen).
No. You cannot charge other devices using the SoundLink Micro (2nd Gen). The USB-C port is charge-in only.
No.
Try it for 30 days to make sure it’s right for you.
Shop confidently. We’ll match a lower price.
On all in-stock orders of $69 or more.
My Bose members receive exclusive offers, experiences, and more.
Bose SoundLink Flex Portable Speaker (2nd Gen)
¹ Using Bluetooth A2DP audio at 50% volume and between 20°C–25°C (68°F–77°F), with default EQ using a mix of Top 50 Global tracks as of February 2024 and no charging of external devices. Battery performance varies with individual user conditions, such as audio content, loudness, and environmental temperature.
² With 5V/1.5A (7.5W) USB-C capable power supply, from 0% to 100% while unit is in standby mode. Charging times will vary when not using the recommended 7.5W supply.
Bose SoundLink Micro Portable Speaker (2nd Gen)
¹ With 5V/1.5A (7.5W) USB power supply, from 0% to 100% while unit is in standby mode. Charging times will vary when not using the recommended 7.5W supply.
² Using Bluetooth A2DP audio at 50% volume and between 20°C–25°C (68°F–77°F), with default EQ using a mix of Top 50 Global tracks as of November 2024. Battery performance varies with individual user conditions, such as audio content, loudness, and environmental temperature.